Approved subject to conditions

For an Accessory Building or Structure (Retaining Wall) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Interior Side Yard – Accessory Buildings] to allow a placement of 0.0m where the minimum required is 0.60m, a variance of 0.60m. 

For an Accessory Building (Garage) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Secondary Frontage] to allow a Secondary Frontage of 1.99m where the minimum required is 3.0m, a variance of 1.01m.

For fifty-four (54) Fascia Signs and one (1) Roof Sign in the Industrial Business Park District (IBP) with the following variances:

• Section 4.3.2.c [Fascia Sign – Miscellaneous - Projection] to allow a sign projection of 30.48cm where the maximum permitted is 20cm.
• Section 4.3.5.b [Roof Sign – Size – Area] to allow a roof sign area of 6.52m² where the maximum permitted is 3.0m².

For an Addition – Wash Station (Site Plan, Building Elevations, Building Floor Plan and Landscape Plan Amendments – DP164-23 & DP2024-0177) in the General Commercial District (GC).

An accessory building (garage) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Rear Yard – Accessory Buildings] to permit a rear yard setback of 0.78m where the minimum required is 1.0m, a variance of 0.22m. 

For a Multi-Residential (72 Dwelling Units in 5 Buildings) in the Neighbourhood Core District (NC) with the following variances:

• Section 3.7.E.a [Lot Size] to permit lot width of 114m where the maximum lot width for stacked units is 32m, a variance of 82m.
• Section 3.7.H.1.b [Active Transportation Networks] to permit a sidewalk width of 1.2m where the minimum sidewalk width is 1.5m, a variance of 0.3m. 

For fascia and ground signs in the General Commercial District (GC) with the following variances:

• Section 4.3.2(b) [Fascia Sign - Size] to allow a fascia sign of 6.6 m² (Sign ID# 1 “Toyota”), where the maximum is 5.0 m², a variance of 1.6 m².
• Section 4.3.3(c) [Ground Sign - Number] to allow two (2) ground signs, where the maximum is 1 per site, a variance of one (1) ground sign.

Two (2) Fascia Signs in the Downtown District (D) with the following variances:

• Section 4.3.2.b [Fascia Sign, Size, Area] to permit one (1) Fascia Sign with a sign area of 4.15m², where the maximum area is 3.0m².
• Section 4.3.2.b [Fascia Sign, Size, Area] to permit one (1) Fascia Sign with a sign area of 3.32m², where the maximum area is 3.0m². 

A Multi-Residential (102 Dwelling Units – Row Houses) in the Neighbourhood Core District (NC) with the following variances:

• Section 3.7.I.1.b [Bicycle & Vehicle Parking Standards, Bicycle Parking] To allow 3.8 stalls per building, where the minimum required is 6 stalls per building, a variance of 2.2 stalls per building.
• Section 5.20.A.1 [Additional Setback & Encroachment Considerations, Retaining Wall] To allow a maximum retaining wall height of 2.4m where the maximum permitted is 1.0m.

For Education (Daycare) in the Industrial Business Park District (IBP).