Approved and released

For an Accessory Building (Pergola) in the Traditional Neighbourhood District (TN) with the following variances:

• Section 3.6.E.b [Building and Placement Standards – Interior Side Yard – Accessory Buildings] to allow an interior side yard setback of 0.21m where the minimum required is 0.60m, a variance of 0.39m.
• Section 3.6.E.b [Building and Placement Standards – Rear Yard – Accessory Buildings] to allow a rear yard setback of 0.26m where the minimum required is 1.0m, a variance of 0.74m.

For four (4) Fascia Signs in the General Commercial District (GC) with the following variances:

• Section 4.3.2.b. [Fascia Sign – Size – Area] to allow a fascia sign area of 5.30m² where the maximum permitted is 5.0m².
• Section 4.3.2.c. [Fascia Sign – Miscellaneous – Number] to allow two (2) fascia signs per bay façade where the maximum permitted is one (1) fascia sign per bay façade. 

For an Addition (Covered Patio) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Interior Side Yard – Primary Building (Detached Buildings)] to allow an interior side yard of 0.0m where the minimum required is 1.20m, a variance of 1.20m.

For Education (Amend DP180-20) in the Traditional Neighbourhood District (TN).

For a temporary approval of an Accessory Building or Structure (Shipping Container) in the Recreation & Open Space District (ROS) with the following variance:

• Section 3.5.E.d [Architecture] That the material and design is not compatible with other buildings on the site and in the vicinity, where the materials and design must be compatible with other buildings on the site and in the vicinity. 

For Deck, Accessible Ramp, Fencing and Signage Amendments in the Downtown District (D) with the following variance:

• Section 4.3.3.c [Ground Sign - Miscellaneous] to allow two (2) ground signs where the maximum number of grounds signs permitted is one (1) per site, a variance of one (1) ground sign.

For an Accessory Building or Structure (Retaining Wall) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Interior Side Yard – Accessory Buildings] to allow a placement of 0.0m where the minimum required is 0.60m, a variance of 0.60m. 

For an Accessory Building (Garage) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Secondary Frontage] to allow a Secondary Frontage of 1.99m where the minimum required is 3.0m, a variance of 1.01m.

For fifty-four (54) Fascia Signs and one (1) Roof Sign in the Industrial Business Park District (IBP) with the following variances:

• Section 4.3.2.c [Fascia Sign – Miscellaneous - Projection] to allow a sign projection of 30.48cm where the maximum permitted is 20cm.
• Section 4.3.5.b [Roof Sign – Size – Area] to allow a roof sign area of 6.52m² where the maximum permitted is 3.0m².

For an Addition – Wash Station (Site Plan, Building Elevations, Building Floor Plan and Landscape Plan Amendments – DP164-23 & DP2024-0177) in the General Commercial District (GC).