Approved and released

For a temporary approval of an Accessory Building or Structure (Shipping Container) in the Recreation & Open Space District (ROS) with the following variance:

• Section 3.5.E.d [Architecture] That the material and design is not compatible with other buildings on the site and in the vicinity, where the materials and design must be compatible with other buildings on the site and in the vicinity. 

For Deck, Accessible Ramp, Fencing and Signage Amendments in the Downtown District (D) with the following variance:

• Section 4.3.3.c [Ground Sign - Miscellaneous] to allow two (2) ground signs where the maximum number of grounds signs permitted is one (1) per site, a variance of one (1) ground sign.

For an Accessory Building or Structure (Retaining Wall) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Interior Side Yard – Accessory Buildings] to allow a placement of 0.0m where the minimum required is 0.60m, a variance of 0.60m. 

For an Accessory Building (Garage) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Secondary Frontage] to allow a Secondary Frontage of 1.99m where the minimum required is 3.0m, a variance of 1.01m.

For fifty-four (54) Fascia Signs and one (1) Roof Sign in the Industrial Business Park District (IBP) with the following variances:

• Section 4.3.2.c [Fascia Sign – Miscellaneous - Projection] to allow a sign projection of 30.48cm where the maximum permitted is 20cm.
• Section 4.3.5.b [Roof Sign – Size – Area] to allow a roof sign area of 6.52m² where the maximum permitted is 3.0m².

An accessory building (garage) in the Traditional Neighbourhood District (TN) with the following variance:

• Section 3.6.E.B [Building and Placement Standards – Rear Yard – Accessory Buildings] to permit a rear yard setback of 0.78m where the minimum required is 1.0m, a variance of 0.22m. 

For fascia and ground signs in the General Commercial District (GC) with the following variances:

• Section 4.3.2(b) [Fascia Sign - Size] to allow a fascia sign of 6.6 m² (Sign ID# 1 “Toyota”), where the maximum is 5.0 m², a variance of 1.6 m².
• Section 4.3.3(c) [Ground Sign - Number] to allow two (2) ground signs, where the maximum is 1 per site, a variance of one (1) ground sign.

Two (2) Fascia Signs in the Downtown District (D) with the following variances:

• Section 4.3.2.b [Fascia Sign, Size, Area] to permit one (1) Fascia Sign with a sign area of 4.15m², where the maximum area is 3.0m².
• Section 4.3.2.b [Fascia Sign, Size, Area] to permit one (1) Fascia Sign with a sign area of 3.32m², where the maximum area is 3.0m². 

A Multi-Residential (102 Dwelling Units – Row Houses) in the Neighbourhood Core District (NC) with the following variances:

• Section 3.7.I.1.b [Bicycle & Vehicle Parking Standards, Bicycle Parking] To allow 3.8 stalls per building, where the minimum required is 6 stalls per building, a variance of 2.2 stalls per building.
• Section 5.20.A.1 [Additional Setback & Encroachment Considerations, Retaining Wall] To allow a maximum retaining wall height of 2.4m where the maximum permitted is 1.0m.

For Education (Daycare) in the Industrial Business Park District (IBP).