Approved subject to conditions

For an Accessory Building (Garage) in the Traditional Neighbourhood District (TN) with the following variance:

1. Section [3.6.E.b] [Building Setbacks, Secondary Frontage] 2.72m where the minimum is 3.0m, a variance of 0.28m.

For a Change of Use - Health & Human Services (Permitted), Retail & Service – General (Discretionary), Education (Discretionary), and Office (Permitted) in the Industrial Business Park District (IBP).

For Dwelling Units (4 Storey Building - 31 Dwelling Units) in the Downtown District (D) with the following variances:

• Section 3.8.E.e. [Building and Placement Standards - Height] to allow a ground floor height of 2.7m where the minimum required is 3.0m, a variance of 0.3m.
• Section 3.7.F.3. [Frontage Standards - Stoop - Entrance Size - Width] to allow an entrance width of 2.65m where the minimum required is 3.0m, a variance of 0.35m.

For Dwelling Units (116 Units in 12 Buildings) in the Neighbourhood Core District (NC).

For a Retail & Service – Large (Vehicle Rental) in the Industrial Business Park District.

For an Accessory Building or Structure (Retaining Wall) in the Traditional Neighbourhood District (TN) with the following variances:

For a Multi-residential (Townhouses, 8 Buildings) in the Neighbourhood Core District (NC) with the following variances:

For an Industrial - Light (New Building and Site Development) in the Industrial Business Park District (IBP) with the following variance:

• Section 3.7.F.2(a) [Frontage Standards - Shopfront] to permit a Shopfront Frontage Type on a site that is not a corner site, where that Shopfront Frontage Type is only permitted on corner sites.

For a Change of Use (Education - Child Care Facility) in the Industrial Business Park District (IBP).

For 40 Dwelling Units (4-Storey Apartment Building) in the Neighbourhood Core District (NC) with the following variances:

The following sections of the Land Use Bylaw are varied pursuant to Section 5.7.B of the Land Use Bylaw:

• Section 3.7.E(b) [Building Setbacks – Primary Frontage] to allow a primary frontage setback of 10.0 m when a maximum of 7.5 m is permitted, a variance of 2.5 m.
• Section 3.7.E(b) [Building Setbacks – Secondary Frontage] to allow a secondary frontage setback of 10.2 m when a maximum of 7.5 m is permitted, a variance of 2.7 m.